The POINT-OF-CARE CR 140 System is ideal for computed radiography examinations in busy clinics and specialty practices. Recommended for satellite locations such as military field installations, CR 140 provides big value. Durable, compact, and lightweight, CR 140 enables all imaging functions to be performed at the point of patient care with one affordable package featuring: the single-plate CR reader, flexible phosphor screens, advanced image management software, and a PC-based review station.
The POINT-OF-CARE CR 140 System is part of a modular solution that can be configured to meet most clinical applications. Its Quality Control Scanner interface lets you set up the system to capture high-quality x-ray images of any body part with minimal steps for scanning, processing, and image quality assurance. All imaging parameters are optimized, resulting in digital images that can be enhanced, enlarged, duplicated, and sent to any location in seconds as a DICOM 3.0 file with no loss of resolution. Images also can be printed or archived locally on CDs or DVDs
Mounted on an optional wheeled Z-cart or placed on a tabletop, the POINT-OF-CARE CR 140 System can be used in virtually any location. With the Z-cart, this system can be rolled into any situation where nearly instant digital images are needed.
Deployed by military forces worldwide, the field-proven POINT-OF-CARE CR 140 System is ideal for remote locations. Its durable design can withstand rough handling, temperature and humidity extremes, and stresses of nature such as wind, sand, and moisture. Even in the most demanding conditions, this portable system is easy to set up and operate.
POINT-OF-CARE CR 140 Specifications
Throughput Up to 40 cassettes per hour (14 x 17 in.)
Acquisition: 12 bits per pixel
Display: 12 bits per pixel
Dimensions (H x W x D)
13.4 x 29.0 x 25.8 in. (34.0 x 73.5 x 65.5 cm)
Weight: 99 lbs (45 kg)
- Z-cart (mobile cart)
- Distributed CR
- Integrated acquisition including: image analysis, archiving, and seamless remote image communications, built on scalable, user-friendly DICOM 3.0 software platform
- Omnivue CHIROPRACTIC OR GENERAL VIEWING SOFTWARE, DICOM SEND, DICOM RECEIVE, Omnivue ACQUISITION SOFTWARE, PoC CR Software V 3.0 Light, Kodak Image Processing Software – KIP, Patient CD Burner
No plates included
Single-phase 50/60 Hz, 200 VA, 100–240
VAC (+/– 10%), 2A, UPS required
FDA (USA), CE (EU), SDA (China), and others available or pending in most major markets
EN 60601-1, 60825-1, 60601-1-2
Operating conditions: 10–40°C, 90% at 35°C
|CareStream Model||Point-of-Care (POC)|
|Number of Included Plates||0 plates|
|Plates per Hour||40 plates/hour|